'Our dream is a small fusion power generator in each house'

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 'Our dream is a small fusion power generator in each house'

    http://toi.timesofindia.indiatimes.com/ ... 419731.cms

    What is the role of Indian scientists in this research?

    Based on a small report in the Times of India on March 24, 1989 about cold fusion, 12 teams of scientists in BARC set up independent electrolytes and observed the phenomenon that was first made public by two US scientists. We were the biggest group responsible for the research at that time in the world. We found evidence of production of tritium and neutrons in the electrolysis. A separate book on the scientific findings was published by BARC. A US team visited BARC in December 1989, saw our findings and gave a positive report to the institute. Based on this report, funds were released for research in a US university.

    What is the current status of research in cold fusion in India and abroad?

    For all practical purposes, research in India has come to a standstill since the mid-1990s. I have been trying to keep scientists and the public informed about the breakthrough in nuclear energy. Unfortunately scientists still remain sceptics. Since 2008, some scientists in India have started to look at cold fusion with an open mind. But there's still a long way to go for research to begin. At the international level research is underway in Russia, the US, Europe, South Korea, Japan and China. Around 300-400 scientists are involved in the research. On January 14, two scientists in Italy demonstrated production of 20 KW of energy using hydrogen and nickel in a lab.

    What are the new findings on this issue in the past decade?

    Transmutation reactions in electrolytic and gas loaded devices is one of the important observations made by the scientists involved in cold fusion research in the past decade. Use of nano-technology has also played an important role in the last three years.

    What is the agenda of the forthcoming conference in Chennai?

    This is the 16th International Conference on Condensed Matter Nuclear Science, held in rotation between Russia, US, Europe and Asia. For the first time it is being held in India. The main aim of the conference is to draw the attention of the Indian scientific community to cold fusion. It is also an opportunity for the scientists to listen to the original researchers. Around 60 scientists from nine countries are participating in the meet.

    Why is there opposition to the cold fusion theory?

    There is opposition because the findings do not tally with textbook nuclear physics. However, scientists will have to think about nuclear and chemical reactions in a holistic way.

    What is the future of this research?

    Our dream is to have a small fusion power generator or pack with a capacity to produce 20-100 KW of energy in each house. Mankind needs a new source of energy and this could be a major source to meet the ever-increasing demand for power. The findings of this research could change the face of science.

  • #2
    Re: 'Our dream is a small fusion power generator in each hou

    At the present cold fusion in the nuclear industry is a taboo

    There are two reasons for this, one is that first cold fusion tests ended up not to be what was promised and this has left a bad feeling with the investors.

    Secondly the present fusion programs are so lucrative for universities that no one is prepared to let such good money to pass.

    The present fusion program of the Europe has started with 13billion USD, but by the finish it will be in the region of 50-75 billions?? But it will produce a lot of new knowledge and jobs for some 50 000 PhDs to be created in some tens of nations over the next 20-30 years.

    I always say, the fusion with present used path of technology is a dream, which will never come true, if one, understands the working of systems and the processes which are used and are planed to be used for this process. These systems designs and set-ups are done by theoretical physicists and the rest is done by non-nuclear personnel, and anyone whom could point out the faults in the T system used for fusion programs has been washed away to pursue the same gravy tray.

    Homemade cold fusion machines are a real possibilities, but not the way commonly known, there has been an invention by a nuclear physicists Dr F Sefidvash in South-American in the normal fission systems, which this has been financed partially by IAEA, this if reduced in size might be a nuclear solution, but needs a lot of support.

    Cold fusion is not the real alternative for home use, but real term environmental energy scavenging in a large scale is the most feasible alternative for home use.

    With this method, one absorbs all residual magnetic fields in a given environment and make an aggregate of them and then it returns them back as viable energy source for the use at the point of demand.

    These including the aggregation of the magnetic fields emitted from the body as heat, radiation in the environment, background gamma radiation absorption and so on.

    This is one of the only solutions of creating energy for deep space travel too, as once one can capture for example the residual magnetic fields of the light of the stars in space, then one has access to ever lasting energy source for all usages.

    We have developed such systems and have demonstrated their energy output in the recent past to government officials and a 20w system for the large scald demonstration of this technology is under consideration for its presentation in the coming days, which we will demonstrate our large scale scavenging principle and the technology.

    We have systems which have been running with LEDs using this technology, now we will show the power through 20w, LED room lighting, then the scaling up will be child play.

    This is in fact a kind of cold fusion, but it is interesting as the power demand decides the magnetic fields absorption rate from the environment. That is to say the system does not need regulators, but it regulates itself on how much it needs from its environment to absorb.

    We have two systems, which have been running with this method for months, and scaling up to 20w is part of an agreement, which we have signed with a government to demonstrate this in the near future.

    Comment


    • #3
      Re: 'Our dream is a small fusion power generator in each hou

      The Keshe Foundations will make announcement in the next days for your dream to come true. We are ready to commercialise our energy systems for general public domestic use.

      Comment


      • #4
        Re: 'Our dream is a small fusion power generator in each hou

        well now, that is good news!

        Comment


        • #5
          Re: 'Our dream is a small fusion power generator in each hou

          Unless the wind changes direction.

          Comment


          • #6
            Re: 'Our dream is a small fusion power generator in each hou

            Thank you Mr keshe. God bless you.

            Comment


            • #7
              Re: 'Our dream is a small fusion power generator in each hou

              The Foundation has not changed its mind, The power units to be released are advance version of what was planed to be manufactured this year in Antwerp plant of General Motor in Belgium and as we were blocked now we divert the production to a third country.

              The Foundation needs to provide for its up coming international space institute and still keep its independence, to this effect the Foundation as of this week has started the release and commercialisation process of more advanced systems for production of energy as we have done with our medical systems in the last weeks.

              To finance our progress and being able to support the students from third world or from the west whom can not afford the fee and living cost but can be beneficial to the gross of the institute in the future, we are preparing ourselves to be able to found some of our future students and the running of institute independently.

              To achieve this, we have decided as of this week to releases our energy technology as we have done with the MS 200 .

              The Foundation submits for sale as of today for delivery early next year the following:

              Portable 3-4 KW power systems on DC and AC 24 hours a day supply for the value of 5000 euros.

              The systems total annual cost of running, maintenance and fuelling will be 100 euros per year for period of 30 years contract, and the supply of any fuel and maintenance for systems will be done by the Foundation.

              We will try to make these system versatile that they can be used for electric motor cars as well as for home use.

              In 2012 we are only prepared to supply limited number of up to 10000 units.

              These units will comply with European standard. The Foundation will not be responsible for entry custom taxes and transportation of the units to the country of destination (transport cost about 100-200 euros).

              The power output will be set to be for domestic use only and we will not initially release commercial units.

              We will produce the units under the Foundation control and in the future we will transfer the know-how through our students to their country of origin that the proceeds will stay within the Foundation and each nation, for the internal development and education in that country as is stated in the mandate of the Foundation in Netherlands.

              For the ones whom are interested to reserve a unit, they can fill in the reservation form which will be posted on the energy section of the Foundation later and one unit per individual and family will be provided.The Foundation gives priority to its forum members.

              Comparison with present cost of a 3-4 KW

              Windmill technology, (when there is wind to produce energy) 10000-15000 euros
              Solar cell technology (when there is sunshine that the system can generate energy) 15000-19000 euros

              Comment


              • #8
                Re: 'Our dream is a small fusion power generator in each hou

                God bless you Keshe. You are doing the right thing releasing the technology first for private use first instead of commercial. I wish you luck.

                Comment


                • #9
                  Re: 'Our dream is a small fusion power generator in each hou

                  5000 Euros = 6 910.98173 Canadian dollars

                  How will this generator function or what "fuel" will it need, i thought you could make self sustaining generators that dont need fuel and just use the varying magnetic fields of the environment to generate energy. If you're systems could convert all of the electromagnetic spectrum into electric energy it would be much more efficient then current solar cells and it would be possible to make small nuclear reactor batteries or make energy regeneration from heat very efficient, even eliminating entropy within a closed system by allowing a chemical system to always have the same net energy and use that energy to do a function or reverse eternally. We could eliminate the need to consume more energy then the initial storage we have (unless their is kinetic energy loss).

                  Comment


                  • #10
                    Re: 'Our dream is a small fusion power generator in each hou

                    The auxiliary systems which cost more than the system and not the system, control systems and converters and the rest.

                    The system offered is the dynamic system and not the 24 day and night pannel system.

                    The decision to release the dynamic system is for reasons that we will explain in the future.

                    These systems once fuelled do not need fuelling for years.

                    The annual charges are to replace any damages and part is to finance the institute running costs in the future.

                    Comment


                    • #11
                      Re: 'Our dream is a small fusion power generator in each hou

                      Is this dynamic reactor the same as the one that will be used for lift and faster than light travel? How many years will the fuel last for?

                      Comment


                      • #12
                        Re: 'Our dream is a small fusion power generator in each hou

                        The power generation systems will not be the same as the lift system , as for the first time we will use the descending power reduction of matter equal to the energy of an electron, and for this technology of different principles and scale are needed.

                        These systems will not be useable for lift or any other application except what they are set to provide.

                        The plasma reduction technology is what we have developed recently and with this technology we do not foresee the use of coils and so forth.

                        This is a new diversion for the energy system, which was originally tested in 2006 and simplified in 2009 and now we see it as the right time to release the technology.

                        The reason we have chosen this technology to be released is that with this method there can not be any replication and coping of the system and system will stay totally inanimate when is not used and come to life when it is called up on for any power level up to the bridge of 3-4 KW.

                        The inanimate power technology has been the dream of power producing companies and now we are ready to release the technology direct.

                        The origin of this technology was explained in a simple way in the 24 power cell technology for the ones whom understood the inanimate power technology, that is to say that one take from the environment of the reactor what one needs , when as one needs it and no more.

                        This concept surprised the people at the Electro magazine testing lab in 2009, which part was reported by them their last May issue in article called 'just add water' , they were pleasantly surprised that how the system calls up on energy from the water without the for any extra-active electronic circuitry or transformers and so forth.

                        This is a new dimension in energy production and this will bring the production of energy to real bases as it has been in the universe.

                        Use of copper coil system is the waste of material and old fashion way, and the inanimate (lifeless or dull) power technology is exactly how your body works as it calls up on the sugar as you needed and when and where in a muscles you needed it, now we bring our knowledge to you in one sweep and through a very simple power generating technology.

                        Read the first book and understand the concept of creation of plasma of an electron and its inner structure then you will understand how much you have missed even you have read it several times.

                        Comment


                        • #13
                          Re: 'Our dream is a small fusion power generator in each hou

                          Thank you for explaining Keshe. God bless you. Will be looking forward to the technology.

                          Comment


                          • #14
                            Re: 'Our dream is a small fusion power generator in each hou

                            Originally posted by MTKeshe
                            The auxiliary systems which cost more than the system and not the system, control systems and converters and the rest.

                            The system offered is the dynamic system and not the 24 day and night pannel system.

                            The decision to release the dynamic system is for reasons that we will explain in the future.

                            These systems once fuelled do not need fuelling for years.

                            The annual charges are to replace any damages and part is to finance the institute running costs in the future.
                            This is really exciting news! A question I have is that whether a 3 to 4 KW unit is enough to totally power a household which is fairly large, such as here in the US, with appliances such as washers and dryers, air conditioning, lighting, etc. all being used around the same times?

                            And if it is not enough output for simultaneous use of all of these will a larger unit be available?

                            Thanks for putting this into production. The world needs change desperately!

                            Comment


                            • #15
                              Re: 'Our dream is a small fusion power generator in each hou

                              even if it is not enough power to power everything in the house, you can add it to your existing power box and keep your power company connected still. That way when it is not enough power, it can draw some from the power company. And when it is enough, or more than enough, it will provide power to the power company grid, and then THEY will pay YOU for giving them power. It should even out then or come close.

                              Comment

                              Announcement

                              Collapse
                              No announcement yet.
                              Working...
                              X