What is the correct GANs to soak Magrav coils with?

  • Filter
  • Time
  • Show
Clear All
new posts

  • What is the correct GANs to soak Magrav coils with?

    The application of GANs onto the coils is not
    specific in the blueprints. All that is shown is that the
    CH3 goes into the top ball, the CuO2 goes into the centre
    ball and the CO2 goes into the bottom ball.
    Correct me if I am wrong but, the application of the GANs
    on the coils is perhaps the most important part of the
    construction of the Magrav unit. In the teachings which I
    have managed to review, the plasma generators and the
    plasma reactors with the aide of plasma, either produce a
    attraction of plasma in case of the generator - or a
    repulsive force in case of a reactor. This can be seen as
    an implosive or a explosive force.The theory is I have
    come to understand is as seen in the Keshe patent for a
    reactor the lighter atomic element goes in the centre and
    the heavier atomic elements go outside of the centre in
    layers until the heaviest is on the outer shell. This is
    the design of the Keshe reactor patent and so I assume
    this device is creating a repulsive force for antigravity
    and lift.
    The logic follows that the plasma generator should use
    a heavier atomic element in the centre and lower atomic
    elements on the outer coils. In the blueprints it shows
    the three balls containing 3 different GANs depending
    on the level. There is nothing specific about what the
    coils are "dopped" with. I have searched everywhere and
    have found nothing. There is some Youtube videos that
    claim all GANs are mixed together and applied to all of
    the coils. But this does not seem correct to me due to
    the above theory.
    Then in the Keshe Plasma Reactor Group for Sept 5, 2017
    at 3:50 Mr. Keshe came on and says that only CH3 is
    applied to the outer magnetic coils and only ZnO is
    applied to the inner gravitic coils.
    Is there ANYONE at all out there that can clarify what
    EXACT GANs are to be placed on the coils??? I am extremely
    suprised that noone else sees the utter importance of
    this issue. The entire teachings are about fields and how
    these fields interact with eachother either through
    attraction of repulsion to find balance...

    Interesting to note that Tesla envisioned the AC motor through observing how the earth rotates around the sun, which in his mind, was related to planetary spin... So I wonder if the Earth causes a phase shift due to mineral deposits like magnets in Tesla's motor? Perpetually spinning and inducing an electromagnetic field, ionosphere and magnetosphere. The plasma coming from the sun powering all. I wonder as the shuman resonnance increases - will the spin change? Will the ionoshere change or the magnetosphere?
    Anyways - GANs are the most important aspect of the Magrav. Does no-one have an answer to the above question?

  • #2
    Hi Elle!
    >> The application of GANs onto the coils is not
    specific in the blueprints.

    Is NO specific way. Mr Keshe said magravs configurations can be as many as stars on the sky!
    If you understand the technology itself then its enough to build your own, unique systems. You will become like art painter or misician, i mean creator.
    If not, then just replicate any available on public at this moment or wait then its will be available.
    I hope i make it clear, more or less.
    ps: i working on my own just right now. If you want follow mine work, then lets communicate somehow (send me PM) and i will give you more info specifically on my configuration, in details. I will be glad to help.


    • #3
      Thank you for your response Spacedream. This is true that the configurations can be as many as the stars in the sky. The configuration must depend on the desired results. And so - if the result you are after is to generate power to get off the grid and be free from the greedy ones who have enslaved the entire human race by selectively suppressing technology as well as creating environmental devastation by forcing us to pay them for fuel AND their spawned petroleum wars - then the right configuration is crucial.
      To fully understand the Keshe Plasma technology is my ONLY goal in life. I am finished being a slave to the banks and feeding the useless takers. From morning till night I study and even in the dream world I find myself consumed. I want to be free!
      Fortunately, yesterday as I watched the Keshe Plasma Reactor Group for Sept 12, 2017 the answer I was seeking to understand was explained by Shandar at 5:17 in the Youtube video. The Plasma fields are the utmost importance whether you wish to have a Magnetical system or a Gravitational system. One gives energy and the other takes energy. As the Magrav is a device intended to create Plasma to power our homes as a replacement for the Hydro Cartel, it must be configured as a Magnetical system. Weakest GANs in the centre, inner coil to be an atomic mass a little larger and finally the outer coil to be the highest atomic mass. This is what Shandar explained but I am not sure if it is absolutely correct yet as the blueprint in the patent for Mr.Keshe's reactor showed the hydrogen ( weakest } in the centre. And a reactor, I understand, is intended as a Gravitational device to produce anti-gravity. This will require further investigation on my part.
      As I have built two Magrav's already and have had them both on-line for 16 days observing the effects, these may now need to be de-constructed and have the proper GANs added.
      Yes - I would love to collaborate. You can communicate with me on this forum any time you like. If I may help you in any way let me know also.


      • #4
        I sent PM to you, Elle.
        Last edited by spacedream; September 25th, 2017, 01:59 PM.



        No announcement yet.