Only the right side of the wire was NANO coated with caustic. After 4 to 5 days the complete wire was NANO coated... even inside the isolated blue plastic... without any help from my side... creepy...
-
Only the right side of the wire was NANO coated with caustic. After 4 to 5 days the complete wire was NANO coated... even inside the isolated blue plastic... without any help from my side... creepy...
-
Hi Mike, did you spray it with caustic or how did you do it? -
For the first time I publish here a plasmareaktor ready for applications.It is not the same was here presented and discussed. This one is filled with the best source water i could find (water is not water), the you start it (slight plasmaprocess), and leave it.What happen then it is amazing. Then I heard from nanocoating, i put it into the reactor, after one day, i got the best coating ever seen. Also the water after a few days, its amazing what i can do with.
By the way, this is, i think, the twentieth version maybe and not the end. this one is done by user in a workshop under my guidance.
Last edited by Mirage; 08-28-2015, 01:00 PM.Comment
-
...center wire get NANO coated first..
if You understand this then You know how planet systems are created.
Keshe Plasma Reactor Group Aug 25 2015
https://www.youtube.com/watch?v=YW4-....be&t=1h25m50s
Comment
-
!!! let me understand better please, are you saying that did you nano coated one side only of the wire, and after that the process ended, all the wire, also the copper coated gum, became nano coated? this is great to try!Originally posted by science2artLast edited by gabriele.desinano; 09-08-2015, 04:42 PM.Comment
-
-
YESOriginally posted by gabriele.desinano View Post
try
IT...
just put the copper wire in the caustic fluid, and let it dry.
https://en.wikipedia.org/wiki/Drain_...drain_cleaners
Repeat this 1 or 3 times, until they are black.
After 4 to 5 days, the copper wires inside the isolation are also NANO coated.Last edited by science2art; 08-29-2015, 10:14 PM.Comment
-
Mirage, these are semiprecious stones inside the reactor and outside stones and the connection is made by the best water? Can you give us a step-by-step education, how to replicate it?Comment
-
1) Hi Mirage, is your plasmareaktor something related about "orgon" energy?Originally posted by Mirage View Post
2) Are you nanocoating materials by utilizing your plasmareaktor? How?
3) about your kashe reactor, the one you utilize in your car, what about the content of the ball?
Thanks in advance
Comment
-
1) There is the need of keep the wire into a closed/opened box during the process?Originally posted by science2art View Post
2) why did you link a wiki page about drain cleaners? There is the need to clean the wires before/after? which one of the wiki ways are you indicating?
thanks in advance
Comment
-
@gabriele.desinano
i use the cheapest, it is only plastik from a craft shop
Yes i put it in my reactor an leave it 2 days, it is coatet well then, CO2 GANS for the first only.
Look at the equator, the GANS is arround it, it stay there, also if the reactor stop.
I test also the nano coatet wire, left and right on the batterie, as i said, i try try and try, and look here what others and Keshe doing, thats all.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
My intesion:
I like to published the design of the (main) reactor later this year
It is amazing what happen, but somthing are strange, not all human are feeling the same, some feels nothingLast edited by Mirage; 08-31-2015, 05:05 PM.Comment
-
I put the link because of this..Originally posted by gabriele.desinano View Post
You don t have to clean the wires.Alkaline drain openers primarily contain sodium hydroxide and some may contain potassium hydroxide.
You simple put the copper wires in the drain cleaner solution and let it dry.
The copper wire will react with the NaOH sodium hydroxide contained in the cleaner and oxygen in the air.
You don t need a box, just let it dry in a save place.
After 1 day the wires usually start to turn black.
Repeat the process 2 to 3 times, till they are complete black.
Now you have started by NANO coating copper wire a plamatic process.
The copper wire inside the isolation will be NANO coated by this plasmatic process.
This can take some time depending on the lenght of the copper wire inside the isolation.
In my case 4 to 5 days.
Last edited by science2art; 08-31-2015, 08:15 PM.Comment
-
@ Mirage Hello .. i was about to follow your link but got a 404 .. http://energie.intech-online.de/Originally posted by Mirage View PostComment
-
Bravo, wiring on battery (while not recommended) is correct.Originally posted by Mirage View Post
If wires nano coated well ( has to be nano coated well !) would give you 25% savings and make electrical system run much better.
No detrimental effects, only upgrade !!!
Side effects on adjacent systems won’t be there, what has been said on this forum about bad side effects - was BS
Thanks for sending photos of small reactor, its the way to go before attempting building larger reactor.
The comment about clockwishness. The CW wiring is BIO FRIENDLY.
The only difference that matters is how YOUR body responds to the flowing energies; from wiring point of view (if cable could think) CW vs. ACW wouldn’t matter.
Comment
-
The correct link is
http://energie.intech-online.de/2-in-car
yesterday the first test.
the glued mini reactor broke away from the fan after 10 km, I've changed it yesterday evening
but these 10 km trip I'll never forget.
But as I drove along a railway track, where an E- train came, since I was just dizzy, the car needed almost no diesel at this time.
I will test further, perhaps it was only a one-time effect.
It is not yet reached or confirmed what happen-
Last edited by Mirage; 09-01-2015, 09:25 AM.Comment
Comment